In order to have a single remote workstation access two different DeltaV Systems, the remote workstation must be configured in both DeltaV Systems. This means creating the remote workstation and then assigning it to a workstation's Remote Network subsystem on each system. The remote workstation should be created with the same name on both systems. Export the workstation configuration file from the first DeltaV System. The DeltaV System can then be installed on the remote workstation and the DeltaV Workstation Configuration program can be executed using the exported workstation configuration file to set up access to the first DeltaV System.
To set up access to the second DeltaV System, export the workstation configuration file from the second DeltaV System. Select Add/Revise DeltaV System Access from the DeltaV Remote Access Control application. The application will read the proper system information off the workstation configuration disk and create the appropriate registry entries needed to allow the remote workstation to access the second DeltaV System.