Remote Operation Network diagnostics

The following diagnostic attributes are supported for the Remote Operation Network:

• OInteg - Overall integrity of the remote network. The following can cause Bad OInteg on the remote network:
• • Any remote workstation connection has a bad primary or secondary communication link
  • Any remote workstation connected to the Remote Access Services (RAS) server cannot communicate with the RAS server. (The remote workstation must have monitor integrity enabled.)
• SwRev (Software Revision) - Software revision of the selected component.
• Conn_Integ (Connection Integrity) - Indicates if the RAS server can successfully communicate with the remote workstations that have been configured on the remote network. This value is Good if the RAS server can communicate with all the remote workstations and Bad if the RAS server cannot communicate with at least one workstation.
  Note

  A configuration option for remote workstations is Monitor Integrity. When this option is selected, Diagnostics reports an integrity error for both the Remote Network subsystem and the remote workstation if the remote workstation is not connected and not communicating with the RAS server. If this option is not selected, Diagnostics will not report an integrity error.

• Pri_CInteg (Primary Communications Integrity) - The overall integrity of communication on the remote network's primary communication link. Bad if any remote connection has a bad primary communications link. Good if all remote connections have good primary communications.
• Pri_ConGood (Primary Connections Good) - The number of good remote communication connections on the primary remote network.
• Pri_ConBad (Primary Connections Bad) - The number of bad remote communication connections on the primary remote network.
• Sec_CInteg (Secondary Communications Integrity) - The overall integrity of communication on the remote network's secondary communication link. Bad if any remote connection has a bad secondary communications link. Good if all remote connections have good secondary communications.
• Sec_ConGood (Secondary Connections Good) - The number of good remote communication connections on the secondary remote network.
• Sec_ConBad (Secondary Connections Bad) - The number of bad remote communication connections on the secondary remote network.
• AvailCon (Available Connections) - The number of remote connections that are still available to other remote workstations that are not configured to be connected through this RAS server.
• Enabled - Indicates if the remote network is enabled or not enabled. The remote network must be enabled to allow remote workstations to connect to the RAS server and access runtime data. Yes means the remote network is enabled; No means the remote network is not enabled.
• NetType (Network Type) - The type of remote network configured. The only value currently supported for network type is "Remote Network."
• Licensed - Indicates of this workstation has a remote network license. Yes indicates a license and No indicates no license. The remote network must be licensed before any remote connections are allowed.
• Pri_MCastCount (Primary Multicast Received Counter) - The number of multicast messages received on the primary remote network.
• Sec_MCastCount (Secondary Multicast Received Counter) - The number of multicast messages received on the secondary remote network.