To see packet statistics for a particular switch port, enter the command in the form:
show interface Ethernet <slot/port>
where slot is the switch interface module and port is the port number of the module.
For example, the out put of the command show interface Ethernet 1/1 for an MD switch looks like the following. Some output has been deleted.
Total Packets Received (Octets).................... 125814 Packets Received > 1522 Octets..................... 0 Packets RX and TX 64 Octets........................ 1505184 Packets RX and TX 65-127 Octets.................... 5991126 Packets RX and TX 128-255 Octets................... 2175111 Packets RX and TX 256-511 Octets................... 131753459 Packets RX and TX 512-1023 Octets.................. 2834 Packets RX and TX 1024-1518 Octets................. 43 Total Packets Received Without Errors.............. 895 Unicast Packets Received........................... 895 Multicast Packets Received......................... 0 Broadcast Packets Received......................... 0 Total Packets Received with MAC Errors............. 0 Jabbers Received................................... 0 Fragments/Undersize Received....................... 0 FCS Errors......................................... 0 Overruns........................................... 0 Total Received Packets Not Forwarded............... 0 Local Traffic Frames............................... 0 . . .