Modifying the motor module - overview > Specifying conditions with the Expression Assistant

Specify the DSTs for MTR-101

  1. In the Function Block diagram, click DC1, the Device Control function block.
  2. In the Parameter window, double-click IO_IN_1, the parameter for the run status signal.
  3. In the Properties dialog, type XI-1 in the Device Tag field, and then click OK.

    If you have configured the controller hardware and I/O channels, you can browse for the Device Tag under the controller.

    The parameter field is automatically set to the correct parameter, FIELD_VAL_D.

  4. Double-click the IO_OUT_1 parameter. (This is the output signal from the Discrete Loop block to the field device.)
  5. In the Properties dialog, type ZX-1 in the Device Tag field, and then click OK.

The parameter field is automatically set to OUT_D.

Related information