Power/Active-(green):
- Continuous green
for the active card
- Flashing green
for the standby card
|
Off
|
System power is not supplied to the card.
Check the power connections.
|
| Internal fault. Contact technical support.
|
| Error-Off
|
Red (continuous)
|
Controller is not scanning card. Check
controller operation.
|
| Card failed self-test. Contact technical
support.
|
| Red (flashing)
|
Controller is not scanning card. Check
controller operation.
|
| Hardware error. Replace card with known good
card of same type; contact technical support.
|
Channel 1 to Channel 8
- On
(yellow)=input>detection level.
- Off=input<detection level
Refer to the card's specifications for the detection levels.
|
|
|