Power/Active-On:
- Continuous green for
the active card
- Flashing green for
the standby card
|
Off
|
System power is not supplied to card due to a
possible line power problem. Check the power connections.
|
| Internal fault. Contact technical support
|
|
Simplex (flashing)
Redundant active and standby (flashing)
|
Incorrect terminal block for configured card
type. Install a redundant terminal block for a redundant card and a simplex
terminal block for a simplex card.
|
| Error-Off
|
Red (continuous)
|
Controller is not scanning card. Check
controller operation.
|
| Card failed self-test. Contact technical
support.
|
| Red (flashing)
|
Controller is not scanning card. Check
controller operation.
|
| Hardware error. Replace card with known good
card of same type; contact technical support.
|
| Port 1 and Port 2-On (yellow)
|
Off
|
No communications. Check connections, cable,
and external devices.
|
| Port not enabled. Enable port.
|
| Configuration mismatch such as redundant card
configured in database and simplex card installed. Fix configuration errors.
|
| Yellow (flashing)
|
Communication error on this port. Check
connections, cable, and external devices.
|
| No configuration for this port. Configure port.
|