The 16-Pin Mass Terminal block provides 1:1 signal transmission of eight signals to the external passive input/output modules. The two-row header accepts a 16-pin 1-for-1 passthrough, 0.093 mm 2- ribbon cable (28 AWG) with 2x8 header connectors (AMP part #1658622-3, Strain Relief #499252-8). The assembly interfaces to an IDC-to-discrete-wire module, such as the Phoenix Contact 2304432 FLKM16 VARIOFACE ribbon connector module, or other similar modules. It can also interface to the HiD Series Boards from Pepperl+Fuchs if IS Barriers are required. The Phoenix Contact 2304432 FLKM16 VARIOFACE ribbon connector module and the Pepperl+Fuchs HiD Series Boards are Emerson Alliance Program products.
| Pin on mass terminal block | Channel nomenclature |
|---|---|
| Pin 1 | Channel 1- |
| Pin 2 | Channel 1+ |
| Pin 3 | Channel 2- |
| Pin 4 | Channel 2+ |
| Pin 5 | Channel 3- |
| Pin 6 | Channel 3+ |
| Pin 7 | Channel 4- |
| Pin 8 | Channel 4+ |
| Pin 9 | Channel 5- |
| Pin 10 | Channel 5+ |
| Pin 11 | Channel 6- |
| Pin 12 | Channel 6+ |
| Pin 13 | Channel 7- |
| Pin 14 | Channel 7+ |
| Pin 15 | Channel 8- |
| Pin 16 | Channel 8+ |