Interface Specifications > Redundant Terminal Blocks

Redundant H1 Terminal Block

Specifications

Table: Redundant H1 Terminal Block Specifications
Item Specification
Voltage rating 35 VDC
Maximum Current 500 mA
Mounting Assigned slots of I/O carrier. The lower slot number must be odd and the upper slot number must be the next higher even number. For example, slots 1 and 2, slots 3 and 4, and slots 5 and 6 are valid pairs. Slots 2 and 3 are not a valid pair.

Terminal Block Connections

Figure: Redundant H1 Terminal Block