Enable the Mynah Integration web service

If you are using the Mynah Mimic application for simulation, you must enable the Mynah Integration web service.

Note

The Mynah Integration web service is intended for use only in DeltaV Simulation systems. 

To enable and start the Mynah web service:

  1. Select Start → DeltaV Engineering → System Preferences. 
  2. Select Enable Simulation Download.
  3. Click OK.
  4. Select Start → DeltaV Engineering → Database Administration.
  5. Close all DeltaV applications.
  6. Select File → Shutdown Server.
  7. After the Database Server shuts down, select File → Connect to Server.
  8. From DeltaV Explorer, open the ProfessionalPLUS workstation Properties dialog.
  9. Select Enable Mynah Integration Web Service.
  10. Click OK.
  11. Download ProfessionalPLUS setup data.

    It may take a few moments for the Mynah Integration web service to start.

The Mynah Integration web service should now appear in the Gateway Administration application.

After you enable the Mynah service the following services start on the ProfessionalPLUS workstation:

  • Monitor Service

  • Mynah Integration web service