Secondary network pane (decommissioned switches)

This pane contains the list of decommissioned switches in the Secondary Network. The columns in this pane contain the following information for each switch.

Column	Description
MAC Address	The Media Access Control address.
IP Address	IP address (if any) of the switch, or 0.0.0.0 if there is no IP address.
Model	The switch model type, for example RM100-Base Model.
Software Revision	Version of the software running in the switch.
Name in Switch	The name stored in the switch, for example RM100-005E74.

Available Commands

From this pane, you can do the following when a switch is selected.

Flash the LEDs on the switch (if the switch software version is greater than 04.2.03).
Unlock the switch if it is locked.
Commission the switch.
Commission the switch as a replacement for an existing switch.

Drag and Drop Behavior

You can perform some actions by dragging and dropping switches from the Summary pane to the Tree View pane.

Drop Target Node	Result
Commissioned Switches node	Runs the Commission command on the switch.
Commissioned Primary or Secondary Network Node	Runs the Commission command on the switch.
nodes representing commissioned switches	Runs the Commission as Replacement command on the switch (if the target switch is not communicating).