The commissioned firewall details pane contains the list of properties for the selected firewall. For each property, the pane contains the property name, the current value (if any), and a description of the property as described in the table below. Sorting of information by column is not allowed in this pane.
For information on the alarm icons that can appear in this pane, refer to the Alarm Icons topic.
| Property | Example Value | Description |
|---|---|---|
| Alarms | ||
| COMM | Blank or icon | An icon indicates a COMM alarm is active on the firewall. |
| FAILED | Blank or icon | An icon indicates a FAILED alarm is active on the firewall. |
| MAINT | Blank or icon | An icon indicates a MAINT alarm is active on the firewall. |
| ADVISE | Blank or icon | An icon indicates an ADVISE alarm is active on the firewall. |
| Current Status | ||
| Power Supply 1 | Good | Status of the power supply. |
| Power Supply 2 | Unavailable | Status of the power supply. |
| Chassis Temperature | 35 degrees C | Firewall chassis temperature in Celsius. |
| Digital Signal | High |
Displays the digital output of the firewall. Under normal conditions the signal will be high. The signal will be low if one or both of the two power supplies are defective or if there is a system error. This error can be logged to the syslog server. |
| CPU Usage | 30 | Specifies the usage percentage of the CPU. |
| Memory Usage | 15 | Specifies the usage of the memory of the firewall. |
| Device Information | ||
| Location Description | User configured text | Configured location/description of the firewall. |
| IP Address | 192.168.1.1 | IP address of the firewall.
Note The example shown is the default IP address. Your firewall address will be different. |