IO for the DeltaV PK controller

The DeltaV PK controller supports the following IO communication:

Local I/O (connected through the railbus)
I/O through the IOPs (Ethernet I/O Ports)
Modbus TCP (through the Device Network)
Ethernet IP (through the Device Network)

The DeltaV PK controller supports the following I/O:

M-Series I/O cards (with the exception of M-Series IS I/O cards)
- Direct connection to 4-wide and 8-wide carriers.
- Up to 8 carriers (any combination of 4- or 8-wide carriers).
S-Series I/O cards
- With an adapter to connect the S-series 8-wide carrier to the PK controller.
- Up to 8 carriers.
CHARMs I/O (CIOC and CIOC2)
- Up to 16 CIOCs.
- Networked through DeltaV ACN - redundant or simplex.
Wireless I/O
- Up to 16 WIOCs.
- Networked through DeltaV ACN - redundant or simplex.
M-series Zone 2 Remote I/O

Note

For the fastest loop execution time, use the supported High Density cards in a simplex configuration. Redundant configuration, Bus cards, increased loading of the railbus all contribute to longer loop execution times.

The supported cards for fast execution (that is, 25ms and 50ms module execution time) are

DI Card, 32 Ch., High Density, M-series Series 2 Plus
DI Card, 32 Ch., High Density, Redundant, M-series Series 2 Plus
DO Card, 32 Ch., High Density, M-series Series 2 Plus
DO Card, 32 Ch., High Density, Redundant, M-series Series 2 Plus
DI Card, 32 Ch., High Density, S-series Plus
DI Card, 32 Ch., High Density, Redundant, S-series Plus
DO Card, 32 Ch., High Density, S-series Plus
DO Card, 32 Ch., High Density, Redundant, S-series Plus