AI Block: Valid Engineering Units and CHANNEL Values
|
Primary Value CHANNEL = 1 |
Sensor Temperature CHANNEL = 2 |
Pressure CHANNEL = 3 |
Maximum Pressure CHANNEL = 4 |
Counter P > Pmax CHANNEL=5 |
| % | °C | atm | atm | no units |
| atm | °F | bar | bar | |
| bar | °R | ftH2O | ftH2O | |
| cm | K | g/cm² | g/cm² | |
| cm³ | hPa | hPa | ||
| dm³ | inH2O | inH2O | ||
| ft | inHg | inHg | ||
| ft³ | kg/cm² | kg/cm² | ||
| ftH2O | kPa | kPa | ||
| g | mbar | mbar | ||
| g/cm² | mmH2O | mmH2O | ||
| gallon | mmHg | mmHg | ||
| hl | MPa | MPa | ||
| hPa | Pa | Pa | ||
| ImpGal | psi | psi | ||
| in | torr | torr | ||
| inH2O | ||||
| inHg | ||||
| kg | ||||
| kg/cm² | ||||
| kPa | ||||
| L | ||||
| lb | ||||
| LTon | ||||
| m | ||||
| m³ | ||||
| mbar | ||||
| mm | ||||
| mmH2O | ||||
| mmHg | ||||
| MPa | ||||
| oz | ||||
| Pa | ||||
| psi | ||||
| t | ||||
| torr |
DI Block: Valid Engineering Units and CHANNEL Values
|
Device Error CHANNEL=1 |
Configuration Error CHANNEL=2 |
Sensor over pressure CHANNEL=3 |
Sensor low pressure CHANNEL=4 |
Sensor over temperature CHANNEL=5 |
|
Sensor under temperature CHANNEL=6 |
Sensor diaphragm broken CHANNEL=7 |
Transmitter over temperature CHANNEL=8 |
Transmitter under temperature CHANNEL=9 |
Sensor temperature error overrange CHANNEL=10 |
|
Sensor pressure error overrange CHANNEL=11 |
LRV user limits exceeded CHANNEL=12 |
URV user limits exceeded CHANNEL=13 |
LRV-Temp User limits exceeded CHANNEL=14 |
URV-Temp User limits exceeded CHANNEL=15 |
DO Block: Valid Engineering Units and CHANNEL Values
|
Reset Counter P > Pmax CHANNEL=1 |
| no units |