Phase Logic Configuration > Testing UM_COLOR_100 using the Batch graphic

Reset the FILL phase

  1. When the tank finishes filling, the phase automatically goes to Complete.
  2. Send a Reset command to place the phase in the Idle state.
  3. Unload the phase by clicking the Unload button on the UM_COLOR_100/P1 faceplate.
  4. Click the Reset Color Tanks button on the Process graphic to reset the tank.
  5. Minimize DeltaV Operate.

You might want to repeat the exercises for testing the FILL phase until you are comfortable with the procedures. Later, in the Verifying Phase Coordination topic, you will use the Batch picture for stepping through equipment arbitration and phase messaging.