| Name | Context | Path | Description |
|---|---|---|---|
|
ControlStatus |
CSLS |
CSLS_NAME/CONTROL_STATUS, CSLS_NAME/REDU/STBY/CONTROL_STATUS |
Status of the Control Subsystem |
| Conditions | Meaning | Mapping | Impacts Integrity |
|---|---|---|---|
| Control Data Mismatch Between Cores | The control subsystems have determined a mismatch in dynamic data other than outputs and secure parameter values. | Advise | Y |
| Modules Not Executing At Configured Scan Rate | The logic solver has set the actual scan rate longer than the configured scan rate based on the estimate of execution time at download. | Maintenance | Y |
| Error on Non-Volatile Memory Restore | The control subsystem was not able to restore saved parameter records after a powerup or restart and has initialized non-volatile memory. The CSLS is in an unconfigured state. The error is cleared on the next download or reset. | Maintenance | Y |
| Less Than 5 Percent of Parameter Records Available | Non-volatile memory availability to store parameter change records is low. | Advise | Y |
| Cyclic Redundancy Check Error on Non-Volatile Memory | A CRC error occurred when writing a parameter record or during periodic check | Maintenance | Y |
| All Non-Volatile Memory Parameters Records Exhausted@ | No more non-volatile memory is available for parameter change records | Advise | Y |
| Proof Test Reminder is Active | The logic solver proof test timer is within the reminder period of the required interval. | Advise | N |
| Proof Test is Overdue | The logic solver proof test timer has exceeded the required interval. | Advise | N |