|
ACTIVE_CAUSESn
(16-bit unsigned integer)
|
0
|
Indicates which of the causes associated with an effect are currently active (0).
|
|
CAUSEn
(Discrete with status)
|
0
|
Input parameter. Indicates an inactive (1) or active (0) process trip condition. CAUSEn is extensible from 1 to 16. The default count is 4.
|
|
CAUSE_MASK
(16-bit unsigned integer)
|
0
|
Bitstring used to mask causes, where 1 (True) means the corresponding cause cannot become active.
|
|
CEM_ALERTS
(Option bitstring)
|
None
|
Contains the runtime value of alarm conditions set by the block (inactive = 0, active = 1)
-
An Effect is forced to Trip or Normal
-
An Effect has a non-zero FIRST_OUT
For a description of the alerts and information on how to access them, refer to CEM_ALERTS table following below this table.
|
|
DELAY_TIMEn
(Floating point)
|
0
(Seconds)
|
The number of seconds before EFFECTn changes to Tripped after a trip is initiated due to an active cause.
|
|
DELAY_TIMERn
(Floating point)
|
0
(Seconds)
|
Countdown timer for the trip delay function for EFFECTn.
|
|
DESC_CAUSEn
(String)
|
None
|
User-defined label for CAUSEn.
|
|
DESC_EFFECTn
(String)
|
None
|
User-defined label for EFFECTn.
|
|
EFFECTn
(Discrete with status)
|
0
|
Normal (1) or Tripped (0). EFFECTn is extensible from 1 to 16. The default count is 1.
|
|
FIRST_OUTn
(16-bit unsigned integer)
|
0
|
Indicates the cause or causes that first tripped EFFECTn.
|
|
FORCE_EFFECTn
(Named Set)
|
Do Not Force
|
The choices are:
-
Do Not Force
-
Force Trip
-
Force Normal
|
|
FORCE_OPTS
(Option bitstring)
|
None
|
Configurable options for the forcing of Effects:
-
Forcing of multiple Effects is allowed
-
Force permit is not required to force Effects
-
Force permit control should be visible in operator interface
|
|
FORCE_PERMIT
(Boolean)
|
False
|
When a permit is required to force effects (see FORCE_OPTS), an effect can be forced only when FORCE_PERMIT is True.
|
|
LATENT_TRIP
(Boolean)
|
False
|
When True, indicates that changing FORCE_PERMIT from True to False trips one or more effects.
|
|
MATRIX
(16-bit unsigned integer matrix)
|
NA
|
Holds the association of causes with effects. It is configured using a grid of check boxes to associate one or more causes with each effect.
|
|
OVERRIDESn
(Named Set)
|
None
|
Indicates the highest priority override present on EFFECTn. The possible values are:
-
None
-
Forced to Trip
-
Forced to Normal
-
All associated Causes masked
|
|
REQUIRE_RESETn
(Boolean)
|
True
|
Determines whether an operator reset is required before EFFECTn can transition to Normal.
|
|
RESETn
(Boolean)
|
False
|
A value of True is required to transition STATEn from Ready to Reset to Waiting for Start Permit or Normal.
|
|
RESET_PERMITn
(Boolean)
|
True
|
A value of True is required for STATEn to transition to Ready to Reset.
|
|
START_PERMITn
(Boolean)
|
True
|
A value of True is required for STATEn to transition from Waiting for Start Permit to Normal.
|
|
STATEn
(Named Set)
|
Tripped
|
Indicates the current state of EFFECTn:
-
Normal
-
Trip Initiated-Delayed
-
Tripped
-
Waiting for Reset Permit
-
Ready to Reset
-
Waiting for Start Permit
|
|
STATUS_OPT
(Named Set)
|
Always use Value
|
Determines the behavior when the status of an input is Bad. Choices are:
-
Always use Value
-
Use Last Good Value if Bad
-
Trip if Bad
|