Assign an SIS module to a Logic Solver

This example assumes that an SIS module is open in Control Studio and has not been assigned to a Logic Solver.

  1. On the Home tab, in the Module group, click Assign to Node.
  2. In the Browse dialog, select the Logic Solver to which you want to assign the SIS module.
  3. Click OK.

If there are enough slots available on the corresponding controller, the module is assigned to the selected Logic Solver and a reference is created under its Assigned SIS Modules. The Logic Solver can have as many as four assigned SIS modules. An SIS module can only be assigned to a Logic Solver, and non-SIS modules cannot be assigned to a Logic Solver.