Reassign an SIS module

This example assumes that an SIS module is open in Control Studio and is assigned to a Logic Solver.

  1. On the Home tab, in the Modules group, click Assign To Node.
  2. In the Browse dialog, select the Logic Solver to which you want to reassign the SIS module, and then click OK.
  3. Click Yes in the Confirmation dialog.

If there are enough slots available on the corresponding controller, the module is assigned to the selected Logic Solver and a module reference is created under its Assigned SIS Modules. The Logic Solver can have as many as four assigned SIS modules. An SIS module can only be assigned to a Logic Solver, and non-SIS modules cannot be assigned to a Logic Solver.

After reassigning a module to a different Logic Solver, you will need to download both Logic Solvers.