The Condition Summary Viewer

The Condition Summary Viewer displays a list of unsuppressed and suppressed conditions of the hardware alarm parameters for a node.  You can only run one copy of this application on the one workstation. Each workstation can have one copy running. Each Condition Summary Viewer displays the conditions of one node (for example, lists the conditions of one controller).

The list of unsuppressed and suppressed conditions includes the subsystem from where the condition emanates, the condition message (which gives you more details about the condition), the time that the condition was added to the list, and the alarm that the condition triggered. The Suppress Conditions list also indicates if the condition is active (red light) or inactive (gray light).

The conditions are ordered by the Time column with the most recent condition first.  You can select a different sorting by clicking any of the column headings. This action sorts the list based on the column heading clicked in either an ascending or descending order. Clicking the same heading twice toggles between ascending and descending order.

To unsuppress or suppress a condition, select that condition and click the appropriate button. When the action completes successfully, the condition is displayed in the other list. Therefore, if you suppress an unsuppressed condition and it is successful, that condition is now listed in the Suppress Conditions list.

To filter the lists, click the appropriate filter button for that list. When the button appears to be pushed in, conditions of that type are shown on the viewer's list. Otherwise, conditions of that type are not shown on the viewer's lists.

The following buttons perform all the functions available in the Condition Summary Viewer.

Suppress/Unsuppress

The Suppress/Unsuppress features are also available on the context menu (select the condition and right click).

	Suppresses the selected condition. The condition is then listed in the viewer's Suppress Conditions list.
	Unsuppresses the selected condition. The condition is then listed in the viewer's Unsuppress Conditions list.

Filters

	When the button appears to be pushed in, shows the FAILED conditions. Otherwise, the FAILED conditions are not shown.
	When the button appears to be pushed in, shows the MAINT conditions. Otherwise, the MAINT conditions are not shown.
	When the button appears to be pushed in, shows the ADVISE conditions. Otherwise, the ADVISE conditions are not shown.

General Functions

	Keeps the viewer window on top of all other application windows. It can never be covered by other windows. This button is selected when it appears to be pushed in. Otherwise, the viewer window will not stay on top of other applications' windows.
	Forces the viewer to refresh its data.
	Launches the DeltaV Diagnostics application. If the Always on Top option is enabled, the Diagnostics window will be hidden behind the Condition Summary window.
	Launches the DeltaV Smart Switch Command Center (SSCC). This icon is available only if the selected item is a switch module.
	Prints the current list of conditions. This sends the current display of conditions (sorting and filtering applied) to the default printer.
	Saves the current data to a condition report summary XML file in the DeltaV\DVData\ConditionSummaryReports folder. The file is named with the current date (YYYYMMDD) and time (HH-MM).
	Opens helpful information about using this application.