Configuring the DeviceNet master consists of adding the card to the DeltaV Explorer's I/O subsystem and configuring the port. In the Add Card dialog, select Bus Cards in the Card class field and then select DeviceNet as the card type. Port configuration involves specifying the card's behavior if it can't communicate with the DeltaV Controller (Stop Scanning or Continue Scanning) and specifying the baud rate (125kb, 250kb, or 500kb). Remember that the baud rate for each device must match the baud rate set for the DeviceNet master. The DeltaV Explorer online help on the port Properties dialog provides detailed information on all the configuration properties for the DeviceNet card.