SLS 1508 Analog input channel parameters

No

The last value reported by the card (in percent of range) and the current status of the channel.

Yes

Controls whether NAMUR alarming is performed on the channel. If enabled and if the transmitter supports it, an analog value that is outside the NAMUR limits (106.25% and -2.5%) for four seconds has its status marked as Bad: Sensor Failure.

Yes

The percent value at which the analog value is considered overrange. If the signal is above this limit, its status indicates the value is limited high.

Yes

The percent value at which the analog value is considered underrange. If the signal is below this limit, its status indicates the value is limited low.