|
Parameter name in Diagnostics Explorer |
Context in Diagnostics Explorer |
Runtime path |
Description |
|---|---|---|---|
|
DiagStatus |
Card |
CTL_NAME/IO1/Cxx/DIAG_STATUS |
Status of the diagnostic subsystem in the main processors of the logic solver card |
|
Condition Text in DIAG_STATUS |
Meaning |
Mapping to Alert Condition |
Impacts Integrity? |
|---|---|---|---|
|
Past Error Present |
A condition is present in the card's PAST_ERROR parameter. |
None |
Y |
|
Persistent Fatal Error After Powerup |
The same PAST_ERROR condition was present on back-to-back resets. The card is not fully operational. |
MAINT_ALERTS Card Not Fully Operational |
Y |
|
Task Checkpoint Alarm |
A non-critical task has not completed properly in one of the subsystems in the card. |
ADVISE_ALERTS Task Checkpoint Alarm |
Y |
|
Non-Volatile Memory Battery or Chip Failure |
NVM battery or chip failure has been detected on powerup or during periodic test. |
MAINT_ALERTS Non-Volatile Memory Battery or Chip Failure |
Y |
|
CPU Free Time Low <20% |
The idle time on one or both of the main processors is less than 20% of the total task time. |
ADVISE_ALERTS CPU Free Time Low <20% |
Y |
|
Self-Test Incomplete |
A periodic main processor memory test did not complete in the allotted time. The condition clears when the test completes. |
ADVISE_ALERTS Self-Test Incomplete |
Y |