FailedAlerts logic solver diagnostic parameter

Table: FailedAlerts diagnostic parameter
Parameter name in Diagnostics Explorer	Context in Diagnostics Explorer	Runtime path	Description
FailedAlerts	SLS	SLS_NAME/FAILED_ALERTS	Failure alert status of the logic solver

Table: FailedAlerts condition text
Condition Text in FailedAlerts	Meaning	Action
Program Assertion	Refer to meaning shown for PAST_ERROR. These conditions can be present in FailedAlerts for a simplex logic solver only.	If the fatal condition is persistent, do a manual reset of affected card and contact technical support. If the fatal condition was momentary, contact technical support to report the error.
Resource Error
Memory Test Failure
Uncommanded Switchover
Control Subsystem Compare Error
Timeout on Inter-Processor Link Between Main Processor 1 and Main Processor 2
Timeout Between Main Processor 2 and I/O Processor
Main Processor 2 Compare of I/O Processor Data Failed
Main Processor 2 Compare of I/O Processor Frequency Failed
Task Checkpoint Error
Dual Active Logic Solvers
Hardware Watchdog Failure
Unspecified Hardware Error
Control Subsystem Scheduling Error		Change to a slower logic solver scan rate and re-download.
Both SISNet Connections on Logic Solver are Bad	Neither main processor can communicate on the peer bus. This non-fatal error is applicable for simplex and redundant logic solvers.	Replace the logic solver card with the error (check the value of P2P_STATUS).