SLS 1508 SIS Simulate > Moving SLS 1508 SIS configurations between simulation and real systems > Moving the SLS 1508 configuration from the real system to the simulation system

Import the SLS 1508 configuration from the real system

On the simulation system:

  1. Set up the ProfessionalPLUS workstation and assign licenses for multi-node simulation.
  2. Create Application Stations as needed to simulate the controllers in the configuration.
  3. Set the controller alias names in Simulated Logic Solvers subsystem on the ProfesionalPLUS workstation and Application Stations to match the real system controller names.
  4. Create logic solver cards in the correct slots in the Logic Solvers subsystem.
  5. Import the SIS Network subsystem you exported from the real system (default export file name is SIS Network.fhx). 

    Areas and SIS modules are created as required and the modules are assigned to logic solvers.

  6. Commission the logic solvers.
  7. Download the logic solvers.

    The DownloadProgress.log file includes the message that the logic solver download was different from the last download.