Emerson Smart Firewall specifications

The Emerson Smart Firewall controls traffic going into the DeltaV network; in particular HTTP, OPC, and remote desktop traffic. It also controls traffic coming out of the DeltaV network such as HTTP.

The Safety instructions for the Emerson Smart Firewall can be found in DeltaV Books Online.

Installation notes

Specifications

Table: Emerson Smart Firewall specifications
Item Specification
Input voltage 120/240 VAC, redundant power cords
Input current 1.0 A at 500 mA maximum
Twisted pair ports Two, 10/100 mb/s, auto-negotiating, Ethernet
Serial port Standard 9-pin PC-type D-shell
Cable type Category 5(e) Twisted Pair (TP)
Alarm contacts

2 screw terminals for 16-30 AWG wire.

TTL Output Normally High (+5VDC).

Goes to LOW state if one or both power cords are unplugged or if there is an internal predefined fault.

Mounting 19 inch rack mounted, 1 rack unit (U) high.
Cooling Fanless

Front view

Figure: Front view of the Emerson Smart Firewall