If you have created or imported all the unit modules and recipes,
you can now experiment on your own. You may want to do the
following:
- Add and start the batch PRC_PAINT using different combinations of
color tanks and blenders to see how the batch progresses and how
equipment is allocated during the running of the batch.
- Trip and clear error conditions for the AGITATE phase.
- Hold and restart the batches at various points.
- Switch back and forth between different views in the Batch Operator
Interface and go to different pictures in DeltaV Operate to watch
the batch run and to see the types of information available on the
different screens. You can resize the windows so both are visible
at one time.
- Add a batch, leaving the unit binding as Defer. Then watch for the
Unacknowledged Prompts button to flash. Specify equipment from the
prompt.
When you are done, make sure all the unit modules are reset and under DeltaV Batch control and that all error conditions are cleared.