Startup_glb is the first file opened and defines what is necessary to start the rest. Most of the variables are used to define the window size and position for the main picture layout.
The following table describes the global variables declared in Startup_glb. Changes to these global variables are made either in the User_Ref picture or the Layout file. Refer to Customizing the DeltaV Operate Environment.
|
Global Variable |
Description |
|---|---|
|
gn_ab_h |
Specifies the height of the Alarm Banner window Note Change the value of this variable using the Layout file. |
|
gn_ab_w |
Specifies the width of the Alarm Banner window Note Change the value of this variable using the Layout file. |
|
gn_ab_x |
Specifies the starting X coordinate for the Alarm Banner window Note Change the value of this variable using the Layout file. |
|
gn_ab_x2 |
Specifies the starting X coordinate for the Alarm Banner window on Monitor 2 Note Change the value of this variable using the Layout file. |
|
gn_ab_y |
Specifies the starting Y coordinate for the Alarm Banner window Note Change the value of this variable using the Layout file. |
|
gn_ab_y2 |
Specifies the starting Y coordinate for the Alarm Banner window on Monitor 2 Note Change the value of this variable using the Layout file. |
|
gn_init_step_size |
Specifies the percent completion of the initialization sequence by each GLB file (100 / # of GLB files) |
|
gn_main_h |
Specifies the height of the main window Note Change the value of this variable using the Layout file. |
|
gn_main_h_large |
Specifies the height of the main window if the menu bar is not visible |
|
gn_main_h_small |
Specifies the height of the main window if the menu bar is visible |
|
gn_main_w |
Specifies the width of the main window Note Change the value of this variable using the Layout file. |
|
gn_main_x |
Specifies the starting X coordinate for the main window Note Change the value of this variable using the Layout file. |
|
gn_main_x2 |
Specifies the starting X coordinate for the main window on Monitor 2 Note Change the value of this variable using the Layout file. |
|
gn_main_y |
Specifies the starting Y coordinate for the main window Note Change the value of this variable using the Layout file. |
|
gn_main_y2 |
Specifies the starting Y coordinate for the main window on Monitor 2 Note Change the value of this variable using the Layout file. |
|
gn_mh_disabled |
Disables opening the main pictures on any monitor except the Primary Monitor |
|
gn_mh_orientation |
Specifies the orientation of the monitors as vertical, horizontal, or square |
|
gn_scr_w |
Specifies the maximum width of the Operator Interface windows |
|
gn_scr_x |
Specifies the starting X coordinate used for the Operator Interface windows |
|
gn_space_y |
Specifies the amount of space between each window in Operator Interface |
|
gn_tb_h |
Specifies the height of the Toolbar window Note Change the value of this variable using the Layout file. |
|
gn_tb_w |
Specifies the width of the Toolbar window Note Change the value of this variable using the Layout file. |
|
gn_tb_x |
Specifies the starting X coordinate for the Toolbar window Note Change the value of this variable using the Layout file. |
|
gn_tb_x2 |
Specifies the starting X coordinate for the Toolbar window on Monitor 2 Note Change the value of this variable using the Layout file. |
|
gn_tb_y |
Specifies the starting Y coordinate for the Toolbar window Note Change the value of this variable using the Layout file. |
|
gn_tb_y2 |
Specifies the starting Y coordinate for the Toolbar window on Monitor 2 Note Change the value of this variable using the Layout file. |
|
gn_unseen_h |
Specifies the height that would make the picture invisible |
|
gn_unseen_w |
Specifies the width that would make the picture invisible |
|
gn_unseen_x |
Specifies the X coordinate that is outside the visible area of the monitor |
|
gn_unseen_y |
Specifies the Y coordinate that is outside the visible area of the monitor |
|
gs_def_path |
Specifies the path to the converted function block detail display (*.def) pictures |
|
gs_det_path |
Specifics the path to the converted module detail display (*.det) pictures |
|
gs_hep_path |
Specifies the path to the converted help (*.hep) pictures |
|
gs_iab_path |
Specifies the path to the converted function block faceplate (*.iab) pictures |
|
gs_iaf_path |
Specifies the path to the converted module faceplate (*.iaf) pictures |
|
gs_std_path |
Specifies the path to the converted standard pictures (*.std) pictures |
|
gs_trb_path |
Specifies the path to the converted function block trend (*.trb) picture |
|
gs_trn_path |
Specifies the path to the converted module trend (*.trn) pictures |