Ramp Status – This field indicates the state of the ramp: Complete, Enabled, Paused, Ramping, or Stopped.
Ramp In Mode – This field indicates the mode of the ramp: AUTO, LO, MAN, RCAS, or ROUT.
Time Remaining – This field indicates the time remaining until ramp calculation concludes.
Referenced Mode – This field indicates the mode of the target function block with which the Enhanced Ramp function block is associated.
Start Ramp button – Clicking the Start Ramp button starts the ramp if it has been stopped or paused.
Stop Ramp button – Clicking the Stop Ramp button stops the ramp if it is ramping or has been paused.
Pause Ramp button – Clicking the Pause Ramp button pauses the ramp if it is ramping.
Ramp End Value – This field indicates the value configured for the ERAMP_END_VALUE parameter of the ramp.
Time check box – The ramp is configured with the Use Time parameter option.
Rate check box – The ramp is configured with the Use Rate parameter option.
Ramp Units – This field indicates the unit of time that the ramp is configured to use: seconds, minutes, hours, or days.
Ramp Time – This field indicates the time period for the output to ramp from its initial value to its ramp end point input value.