The quality and substatus of the input parameter (PRES) is normally propagated to the quality and substatus of the output parameter (TEMP). Limit status is not propagated from input to output. If the input quality is Good and its value is out of the range of –14.607 to 3185.4 psig (6.1121×10-4 to 22.064 MPa), the quality of the output is set to Uncertain. The output limit status is set to LowLimited if the input value is less than –14.607 psig and set to HighLimited if the input is greater than 3185.4 psig.