Deadtime function block parameters

None

The indication that a block error condition not selected in BAD_MASK (on the function block level) is True (Active) or the indication that an error condition (at the module level) not selected in MERROR_MASK is True (Active) or a module status not selected in MSTATUS_MASK is True (Active).

None

The indication that a block error condition selected in BAD_MASK (at the function block level) is True (Active) or the indication that an error condition (at the module level) selected in MERROR_MASK is True (Active) or a module status selected in MSTATUS_MASK is True (Active).

None

The set of active error conditions that triggers a user-defined Bad condition. The user selects a subset of block error (BLOCK_ERR) conditions in the BAD_MASK parameter. When any of these conditions are True, the BAD_ACTIVE parameter becomes True. When any of the BLOCK_ERR conditions that are not included in BAD_MASK are True, ABNORM_ACTIVE becomes True.

Seconds

Specifies the time for the internal value of the delay input signal to match the OUT value.

None

The summary of active error conditions associated with the block. The possible block error for the Deadtime function block is:

• Out of Service

Seconds

Time delay introduced in the input signal to generate the output value. Enter a value between 0 and 32400.

None

Allows OUT to track IN (True [1] = active, False [0] = inactive).

Determined by source

The input value and status to be delayed by the block.

None

Parameter used to request and show the source of the output used by the block.

EU of IN

The primary value and status calculated by the block in Auto mode. OUT can be set manually in Man mode.